Almost all city residents dream of having a country house. However, a new property may not be affordable.
Therefore, many prefer to purchase old houses that require repairs.
Review Content:
How to make repairs on your own in an old house?
A review of the real estate market shows that used housing can be bought on favorable terms. Often, old houses are located in areas where infrastructure is well developed. Its owner will not have to bring communications to the housing. All that is required is a good repair in the house.
First you need to determine for yourself the front of work. Plan whether it will be a cheap home repair or major, should begin only after all the flaws found in the building.
Second-hand homes from the Soviet Union often need major repairs. Residential buildings were built of wood, and due to natural wear and tear, they need to be strengthened and rebuilt.
Sometimes you have to demolish the box of the old building, repair the foundation and then build the walls and roof.
In the 90s of the last century, brick was very popular. Durable building materials must retain their positive performance over time. However, when builders neglected their work or used poor-quality mortar, the durability of the structure could be called into question.
A photo of home renovation is a clear proof that old buildings have a right to a second life.
Begin by developing a detailed action plan.
Repair planning?
First of all, you need to inspect the home. During the inspection, it is necessary to assess the condition of the premises inside and outside. And only after that start planning.
Weaknesses of old houses in the private sector:
Walls
Often cracks go along the surface of the entire wall, both inside and outside. Dampness causes peeling of concrete and shedding of plaster.
Such problems indicate errors in design, destruction of waterproofing and poor thermal insulation.
Windows and doors
The likelihood that they will have to be changed is 99%. Particular attention should be paid to window sills. Often the integrity of their coverage is broken.
Condensation indicates poor frame insulation. The door may not close properly when the lock is in poor condition. Another problem is peeling of the seal.
In the 90s, roofing mainly served as tiles, but the laying of the material was carried out illiterate. It is important to examine the condition of the rafter system.
Upon examination, damage to hydro-, steam- or thermal insulation can be detected. It is also necessary to check the superstructures, chimneys and gutters.
Note!
Interfloor overlappings
Interfloor ceilings may bend or crack. When there are no waterproofing materials between the wall and the wood beam, it will need to be changed. It is important to check the concrete floors in the basements.
Floors
If the condition of the floors is poor, then the flooring should be updated. Such drastic measures are required when there are large gaps between adjacent boards, linoleum is burnt, and cracks appear on the surface of monolithic ceilings, or holes appear on it.
Stairs
At the stairs, all damaged elements must be replaced.
Heating system
With special care you need to check the heating system. If the old stove crumbled, then you will need to get rid of it. It is possible that the heating system will have to be completely changed.
To connect to the gas, you need an adapter with certain sizes, the width of the chimneys should not be very large, cast-iron batteries should be replaced with modern radiators.
In the heating system, heating regulators must be installed.
Note!
Plumbing
Repair in a private house cannot but affect the plumbing. In most cases, it is completely changed.
Wiring
Wiring also requires replacement if the voltage is constantly small and household appliances do not work normally.
All of the above problems can be eliminated if you know how to make a DIY repair correctly.
If the foundation is cracked or the roof has become unusable, you will have to spend money on such issues. In this case, the repair will be expensive.
We plan to carry out repairs
A project plan can be created on paper. Special computer programs will help to cope with the planning task. Examples are 3 DMax and Home Designer.
The plan will help determine the sequence of actions. The owner will be able to look at his home after repair. There will be an opportunity to calculate how many building materials will be required.
Note!
Some actions require coordination with the relevant authorities. These include redevelopment or relocation of plumbing equipment.
If you plan to make a beautiful repair in the house, carefully choose the decoration option. In addition, you will need to take care of the sufficient illumination of the premises.
Only eco-friendly materials must be used inside the house.
DIY home repair photo
