Many do not imagine a complete outdoor recreation without aromatic barbecue. Craftsmen can make a brazier out of brick with their own hands. It is simply a must for an away session.
Going to nature, you can build a compact design from improvised materials. And for a summer house a gazebo equipped with a barbecue is more suitable.
Review Content:
Where to start construction?
Think in what place you want to build a brazier. It is better to choose a recreation area for this.
Care must be taken to ensure weather protection. A homemade fireplace can be installed in a summerhouse, under a canopy or in a partially open veranda.
Masters often tackle the difficult task of how to make a barbecue in the form of a multifunctional oven.
Indicators of medium size: width - 1.6 m; height - 1.6 m; depth - 0.8 m. For a multifunctional furnace, it is necessary to make a foundation, an example of which can be a strip foundation.
The master usually complements the complex design with various functional add-ons:
- Niches. They are convenient to use to store skewers and other utensils.
- Notches. They add firewood to dry near the hearth.
- Sink. It is installed when there is a real opportunity to bring communication. It is convenient to wash your hands or dishes.
Not far from the hearth they put a table with benches. The owner is free to choose furniture from budget or expensive options, depending on their financial capabilities and taste preferences.
Brazier drawings will help to competently create a project. After all, it is necessary to take into account not only the technical side of the issue, but also the aesthetic component.
If you look at the photo of the barbecue, it should be the central element of the composition. It is important that all surrounding objects are combined.
Brick building
The design involves the construction of a solid foundation. It is made of sand, gravel, cement and refractory bricks. In addition to construction tools, the master will need a drill with a special nozzle or concrete mixer to prepare the solution.
It is necessary to prepare reinforcing bars with a reinforcing mesh, as well as metal corners with hardware. The master prepares the material in advance to create the crate.
It is important to correctly calculate the total weight of the future design in order to build a solid foundation. If you adhere to the dimensions of the brazier indicated above, the foundation is laid to a depth of 0.5-0.6 m.
Phased construction
Designate a construction site and markup. After this, create a pit with a width of 0.6 m and a length of 1.6 m.
To a depth of 0.6 m, the topsoil is removed.
Make a pillow of sand. Its thickness should not be less than 10 cm. The pillow must be carefully tamped. Along the perimeter of the pit put the formwork.
The next stage is knitting reinforcement. Metal bars are interconnected in the form of a lattice and lowered to the bottom of the pit.
Note!
Make a cement mortar and pour it into the formwork. It must be pierced with a metal rod so that no air remains inside.
Grades 150 and 200 are suitable for the preparation of a cement mixture. Crushed stone with sand is also added to the solution. The proportional ratio of cement, sand and gravel is 1: 3: 5.For the solution, you will also need water - 1 or 2 buckets, depending on how wet the sand is.
The tamped solution is smoothed and leveled. Under the bricks you need to make an even base.
For waterproofing, roofing material and special mastics are used.
Once the foundation has hardened, you can start laying.
The nuances that the master should know about
The kiln brick is characterized by excellent fire resistance, but in the cold it can become brittle. Therefore, a gazebo with a barbecue made of bricks is the best option.
Note!
Before starting construction work, the material is soaked in water. Bricks are capable of absorbing liquid, which can adversely affect the performance of the solution.
The mixture itself is prepared from other components and differs in consistency. It is made of cement, sand and slaked lime in a ratio of 1: 3: 1.
Laying begins to perform from the corners. The length of the back wall is 3 bricks, and 2.5 bricks on the sides. The width should be at least 1.5 bricks. In the process of laying, the master gently taps with a mallet on the surface of the brick to closely fit it to the neighboring one.
Metal construction
A brazier of metal can be made by that craftsman who knows how to handle a welding machine. The craftsman will need sheet metal, metal corners or pieces of reinforcement, a pallet with a grill of the same size and a marker with a tape measure.
The design is a deep roasting pan on legs-supports. If desired, the owner can provide the grill with a smokehouse, then the household will always have the opportunity to enjoy the delicacies of natural smoking.
Note!
Experienced masters can try their hand at making homemade barbecue. Of the two connected cylinders, they create a barbecue smokehouse. The master will need the ability to work as a grinder and a drill.
The chimney is made of chimney, and the supports, handles and legs are made of metal. It is necessary to prepare hinges, nuts with bolts, special enamel and wick. The barbecue grill can be decorated at your discretion.
The main thing in this business is a creative approach.
DIY grill photo
