A playground is considered an important element of every modern suburban area, if the younger generation lives on the territory. The acquisition of swings and similar attributes is not a cheap pleasure.
It is much easier and more affordable to build a playground from improvised materials with your own hands. Let's talk about this issue in more detail.
Review Content:
Design process
The most important condition for creating a playground for children is to carry out design so that the construction is reliable and also as safe as possible.
In addition, when determining the site of the construction site, you need to focus on a place with excellent visibility.
In addition, the idea for a playground should not provide for the arrangement on the site of children's games of wires, various traumatic corners. Also, the site should not be equipped next to the pool or river.
The place for games should be as even as possible, equipped with a soft surface that can minimize the risk of injury during an accidental fall.
When choosing the right material for the design of the playground, opt for a natural array that is harmless, practical, and also easy to use.
Also, wood is easy to process, so any structure can be built from it.
Having painted wood crafts for the playground in a variety of shades, you can get a seemingly attractive area for the active games of your kids.
It is preferable to initially develop appropriate drawings on a piece of paper. In the design documentation, be sure to indicate the estimated dimensions of the parts that are planned to be placed on the site. Also determine the optimal slope angle of the children's slide and, of course, the height.
Optimal ideas
When choosing a suitable idea for designing a summer playground, it is important to focus on children's age, as well as the features of the construction site. Basically, the main element of the site is considered to be a swing, a sandbox, as well as a slide.
In addition, you can build a small fairy house, small slides. Simply put, each element of the playground for children's games should be interesting for kids.
We equip the sandbox
Determining the location of the sandbox, focus on the following points:
- the terrain must certainly be open, that is, well visible;
- it is undesirable to build a sandbox under the crown of trees to prevent debris from entering it;
- certainly take care of high-quality protection against ultraviolet radiation;
- calculate the dimensions so that the kids can move around in it as freely as possible.
As for the form, the square sandbox will become optimal, which is created without problems from wood. To make sure of this, the photo of the playground is proof of this.
When choosing a natural massif, opt for pine, which is considered a moisture-resistant material that perfectly tolerates the radiation of the sun, as well as temperature extremes. Resin in pine is also characterized by antimicrobial properties.
The optimal dimensions of the sandbox are 200 cm by 200 cm. First you need to prepare a special platform using pegs and threads. Having finished with the marking, the upper layer of the earth should be slightly removed. Then you can begin to equip the base in order to fill the sand.
Note!
It is preferable to cover the very bottom of the structure with dense building material. The bottom is closed with a sandy, plastic tile pillow.
Remember that the use of a plastic film is contraindicated, because after precipitation in the sandbox a lot of moisture can accumulate, preventing sand from drying out.
However, materials from geotextiles allow moisture to pass through, but they do not allow various insects to enter sand from the ground.
To close the sides of the structure, boards should be constructed from boards. For convenience, you need to equip the sides.
The possibility of arranging the sandbox with a special shelter in the form of a mushroom is not ruled out. This design will protect the structure from moisture and the sun.
Decorating a place for children's games
If you are interested in how to make a playground for yourself and how to design it, then remember that the use of expensive materials for these purposes is not necessary. It is enough to use a couple of cans of paint, as well as improvised materials.
Note!
An excellent design option is a playground created from tires, or bottles made of plastic, wheels.
To make fabulous palm trees appear on the site, use plastic bottles, and if there are stumps, create paths. Using tires, build various interesting figures for the garden in the form of animals.
Make every effort to ensure that all the details of the playground for children fulfill a developmental function. To do this, you do not need much effort, a minimum of imagination and desire is enough.
DIY playground photo
Note!
